FOR REFERENCE ONLY

This model has been discontinued

Discontinued (2010-2022)

Thorowgood

Thorowgood T4 Dressage

£0.00
Tax included. Shipping calculated at checkout.
Size: 16½”
Conformation: Standard Wither

Colour: Black
Changeable Gullet: N/M to XW/XXW
Gullet Bar Type: R-Bar

Dressage specific tree and moveable under-flap thigh blocks combine to help the rider maintain a balanced dressage position. The low profile panels offer closer rider contact and three built-in girthing options ensure maximum saddle stability.

Luxurious suede-effect seat covering and knee pads are non-slip and really comfortable to ride on.

Flocked with 100% British wool.


Changeable Gullet
Easily change the gullet bar to best fit the width of the horse’s withers
Gullet Bar Widths
XXW*
XW / XXW
XW
W/XW
W
M/W
M
N/M

NB: There are two gullet bar lengths (R and S type) to suit the specific tree designs. *XXW (Silver) size is available in S-Bar only.

Gullet Bar Change - Step 1

Step 1: Use the hex key to remove the 2 screws at the front of each panel.

Gullet Bar Change - Step 2

Step 2: Slide the panel off the point of the tree.

Gullet Bar Change - Step 3

Step 3: Unscrew all four bolts in the gullet bar and remove the gullet bar.

Gullet Bar Change - Step 4

Step 4: Insert different width of gullet bar. Insert all four bolts by hand then secure. Use the indent in the tree to position the bar facing the right way.

Only SimaTree gullet bars are suitable for Thorowgood saddles. You must NOT use any other bar in your Thorowgood saddle.
The S-Bar and R-Bars are not interchangeable. You must use the correct bar for your saddle model.

Multiple Girthing Options
Thorowgood Moveable Block dressage saddles have an optional 'point strap' which can be used to improve saddle stability.

Multiple Girthing Options

Always start by girthing in the neutral position (2 & 3) with the moveable strap positioned behind the point

Multiple Girthing Options

If the saddle slips forward, remove the Velcro thigh block, move the billet (girth strap) onto the point (1), passing it through the keeper at the bottom. Reinstate the Velcro thigh block back into position.

Multiple Girthing Options

DO NOT pass the strap under the block and through the keeper when the billet (girth strap) is behind the point (2). This will cause saddle instability.

Size
Conformation
Product information

Saddle Care Supplies

Wipe smooth areas of saddle

Use soft bristled brush

Do not use wire brush

  1. Wipe down any smooth sections with warm water and a cloth. If it's really dirty, a mild detergent can be used.
  2. Use a soft bristled brush (such as a body brush) to remove dirt from the seat and knee rolls
  3. Avoid products that are glycerine or oil based, or those that contain alcohol (such as spray cleaners)
  4. Wipe down the non-leather sections (flap and panels) with warm water and a cloth. A mild detergent can be used to remove stubborn dirt. Remember to clean all surfaces. These areas require no further products or conditioners.
  5. If your saddle has leather stirrup straps, take care NOT to apply saddle soap or conditioner to the surface which comes into contact with the saddle flap.
  6. DON'T use a suede brush. The wire bristles are too course for the T4 saddle material and could cause damage.
  7. Radiator iconAlways allow your saddle to dry naturally. Do not use external heat sources and don't put it on a radiator, or hot pipes.