FOR REFERENCE ONLY
This model has been discontinued

Thorowgood
Thorowgood T8 Cob GP
Colour: Black, Brown
Changeable Gullet: N/M to XXW
Gullet Bar Type: R-Bar
Best all-round saddle for the rounder build – a GP for the low withered Cob-type horse.
Offers close contact to avoid that ‘perched on top’ feeling.
Versatile, medium depth seat is ideal for a range of riding activities.
4 girthing options to achieve maximum saddle stability.
Quality leather seat and knee pads give the feel of riding on an all leather saddle.
Flocked with 100% British wool.
Changeable Gullet
Easily change the gullet bar to best fit the width of the horse’s withers
Gullet Bar Widths
NB: There are two gullet bar lengths (R and S type) to suit the specific tree designs. *XXW (Silver) size is available in S-Bar only.
Step 1: Use the hex key to remove the 2 screws at the front of each panel.
Step 2: Slide the panel off the point of the tree.
Step 3: Unscrew all four bolts in the gullet bar and remove the gullet bar.
Step 4: Insert different width of gullet bar. Insert all four bolts by hand then secure. Use the indent in the tree to position the bar facing the right way.
Only SimaTree gullet bars are suitable for Thorowgood saddles. You must NOT use any other bar in your Thorowgood saddle.
The S-Bar and R-Bars are not interchangeable. You must use the correct bar for your saddle model.
Multiple Girthing Options
GP models are fitted with three girth straps. The point (front) strap and second strap are stitched, the third strap is moveable. This changeable girthing arrangement allows saddle stability to be optimised instantly.
Begin by girthing in the neutral position using the second and third billet. (NOTE: This is the same as girthing on the first and third billets on a saddle with a conventional girthing system)
If you find the saddle slips forward, you can use straps 1 and 3
If the back of the saddle lifts away from the horse’s back, move the third strap onto the floating balance position and use straps 2 and 4
For increased stability you can use straps 1 and 4
NEVER girth using positions 1 & 2. This causes saddle instability and potential discomfort for your horse.
Changeable Girth Straps
GP models are fitted with three girth straps. The point (front) strap and second strap are stitched, the third strap is moveable. This changeable girthing arrangement allows saddle stability to be optimised instantly.
Begin by girthing in the neutral position using the second and third billet. (NOTE: This is the same as girthing on the first and third billets on a saddle with a conventional girthing system)
If you find the saddle slips forward, you can use straps 1 and 3
If the back of the saddle lifts away from the horse’s back, move the third strap onto the floating balance position and use straps 2 and 4
For increased stability you can use straps 1 and 4
NEVER girth using positions 1 & 2. This causes saddle instability and potential discomfort for your horse.
1. Clean and feed the leather parts of the saddle (flaps, knee rolls and panels) with a cream conditioner (we recommend Rapide Leathergel). If necessary, wipe off any dirt with a damp cloth first.
2. Wipe down the non-leather sections (skirt) with warm water and a cloth. A mild detergent can be used to remove stubborn dirt. These areas require no further products or conditioners. Remember to clean all surfaces.
3. Avoid products that are glycerine or oil based, or those that contain alcohol (such as spray cleaners)
4. If your saddle has leather stirrup straps, take care NOT to apply saddle soap or conditioner to the surface which comes into contact with the saddle flap.
5. Always allow your saddle to dry naturally. Do not use external heat sources and don't put it on a radiator, or hot pipes.