FOR REFERENCE ONLY
This model has been discontinued



Thorowgood
T8 Original GP
Colour: Black
Changeable Gullet: N/M to XW/XXW
Gullet Bar Type: R-Bar
If your horse is more of medium withered shape (neither high or low wither) and a middleweight build, then this universal fitting saddle is the answer if you are looking for a saddle suitable for a llittle bit of everything. The quality seat and knee pads give the feeling of riding on an all-leather saddle.
This versatile GP is forward enough cut to allow for jumping and cross-country as well as schooling and hacking.
There's a super-comfy leather-covered seat that gives you a little extra in-saddle security and locates you centrally for balance and control.
Fully adjustable knee and calf blocks provide customised leg support.
Luxurious leather seat covering and knee pads give the luxurious feeling of riding on an all-leather saddle.
Changeable Gullet
Easily change the gullet bar to best fit the width of the horse’s withers
Gullet Bar Widths
NB: There are two gullet bar lengths (R and S type) to suit the specific tree designs. *XXW (Silver) size is available in S-Bar only.
Step 1: Use the hex key to remove the 2 screws at the front of each panel.
Step 2: Slide the panel off the point of the tree.
Step 3: Unscrew all four bolts in the gullet bar and remove the gullet bar.
Step 4: Insert different width of gullet bar. Insert all four bolts by hand then secure. Use the indent in the tree to position the bar facing the right way.
Only SimaTree gullet bars are suitable for Thorowgood saddles. You must NOT use any other bar in your Thorowgood saddle.
The S-Bar and R-Bars are not interchangeable. You must use the correct bar for your saddle model.
Multiple Girthing Options
GP models are fitted with three girth straps. The point (front) strap and second strap are stitched, the third strap is moveable. This changeable girthing arrangement allows saddle stability to be optimised instantly.
Begin by girthing in the neutral position using the second and third billet. (NOTE: This is the same as girthing on the first and third billets on a saddle with a conventional girthing system)
If you find the saddle slips forward, you can use straps 1 and 3
If the back of the saddle lifts away from the horse’s back, move the third strap onto the floating balance position and use straps 2 and 4
For increased stability you can use straps 1 and 4
NEVER girth using positions 1 & 2. This causes saddle instability and potential discomfort for your horse.
Changeable Girth Straps
The moveable girth strap can be positioned on the back ring to achieve optimal saddle stability
Step 1: Feed the strap through the ring with the point upwards and the top side of the strap facing down against the sweat flap.
Step 2: Curl the strap round and through the webbing loop
Step 3: Pull the strap tight ensuring the webbing loop lies flat against the top of the strap. (Reverse the above steps to remove a girth strap).
1. Clean and feed the leather parts of the saddle (flaps, knee rolls and panels) with a cream conditioner (we recommend Rapide Leathergel). If necessary, wipe off any dirt with a damp cloth first.
2. Wipe down the non-leather sections (skirt) with warm water and a cloth. A mild detergent can be used to remove stubborn dirt. These areas require no further products or conditioners. Remember to clean all surfaces.
3. Avoid products that are glycerine or oil based, or those that contain alcohol (such as spray cleaners)
4. If your saddle has leather stirrup straps, take care NOT to apply saddle soap or conditioner to the surface which comes into contact with the saddle flap.
5. Always allow your saddle to dry naturally. Do not use external heat sources and don't put it on a radiator, or hot pipes.